Authorization
=============

> Note: This section is under development.

Authorization is the process of verifying that a user has enough permission to do something. Yii provides two authorization
methods: Access Control Filter (ACF) and Role-Based Access Control (RBAC).


Access Control Filter
---------------------

Access Control Filter (ACF) is a simple authorization method that is best used by applications that only need some
simple access control. As its name indicates, ACF is an action filter that can be attached to a controller or a module
as a behavior. ACF will check a set of [[yii\filters\AccessControl::rules|access rules]] to make sure the current user
can access the requested action.

The code below shows how to use ACF which is implemented as [[yii\filters\AccessControl]]:

```php
use yii\filters\AccessControl;

class SiteController extends Controller
{
    public function behaviors()
    {
        return [
            'access' => [
                'class' => AccessControl::className(),
                'only' => ['login', 'logout', 'signup'],
                'rules' => [
                    [
                        'allow' => true,
                        'actions' => ['login', 'signup'],
                        'roles' => ['?'],
                    ],
                    [
                        'allow' => true,
                        'actions' => ['logout'],
                        'roles' => ['@'],
                    ],
                ],
            ],
        ];
    }
    // ...
}
```

In the code above ACF is attached to the `site` controller as a behavior. This is the typical way of using an action
filter. The `only` option specifies that the ACF should only be applied to `login`, `logout` and `signup` actions.
The `rules` option specifies the [[yii\filters\AccessRule|access rules]], which reads as follows:

- Allow all guest (not yet authenticated) users to access 'login' and 'signup' actions. The `roles` option
  contains a question mark `?` which is a special token recognized as "guests".
- Allow authenticated users to access 'logout' action. The `@` character is another special token recognized as
  authenticated users.

When ACF performs authorization check, it will examine the rules one by one from top to bottom until it finds
a match. The `allow` value of the matching rule will then be used to judge if the user is authorized. If none
of the rules matches, it means the user is NOT authorized and ACF will stop further action execution.

By default, ACF does only of the followings when it determines a user is not authorized to access the current action:

* If the user is a guest, it will call [[yii\web\User::loginRequired()]], which may redirect the browser to the login page.
* If the user is already authenticated, it will throw a [[yii\web\ForbiddenHttpException]].

You may customize this behavior by configuring the [[yii\filters\AccessControl::denyCallback]] property:

```php
[
    'class' => AccessControl::className(),
    'denyCallback' => function ($rule, $action) {
        throw new \Exception('You are not allowed to access this page');
    }
]
```

[[yii\filters\AccessRule|Access rules]] support many options. Below is a summary of the supported options.
You may also extend [[yii\filters\AccessRule]] to create your own customized access rule classes.

 * [[yii\filters\AccessRule::allow|allow]]: specifies whether this is an "allow" or "deny" rule.

 * [[yii\filters\AccessRule::actions|actions]]: specifies which actions this rule matches. This should
be an array of action IDs. The comparison is case-sensitive. If this option is empty or not set,
it means the rule applies to all actions.

 * [[yii\filters\AccessRule::controllers|controllers]]: specifies which controllers this rule
matches. This should be an array of controller IDs. The comparison is case-sensitive. If this option is
empty or not set, it means the rule applies to all controllers.

 * [[yii\filters\AccessRule::roles|roles]]: specifies which user roles that this rule matches.
Two special roles are recognized, and they are checked via [[yii\web\User::isGuest]]:
     - `?`: matches a guest user (not authenticated yet)
     - `@`: matches an authenticated user
Using other role names requires RBAC (to be described in the next section), and [[yii\web\User::can()]] will be called.
If this option is empty or not set, it means this rule applies to all roles.

 * [[yii\filters\AccessRule::ips|ips]]: specifies which [[yii\web\Request::userIP|client IP addresses]] this rule matches.
An IP address can contain the wildcard `*` at the end so that it matches IP addresses with the same prefix.
For example, '192.168.*' matches all IP addresses in the segment '192.168.'. If this option is empty or not set,
it means this rule applies to all IP addresses.

 * [[yii\filters\AccessRule::verbs|verbs]]: specifies which request method (e.g. `GET`, `POST`) this rule matches.
The comparison is case-insensitive.

 * [[yii\filters\AccessRule::matchCallback|matchCallback]]: specifies a PHP callable that should be called to determine
if this rule should be applied.

 * [[yii\filters\AccessRule::denyCallback|denyCallback]]: specifies a PHP callable that should be called when this rule
will deny the access.

Below is an example showing how to make use of the `matchCallback` option, which allows you to write arbitrary access
check logic:

```php
use yii\filters\AccessControl;

class SiteController extends Controller
{
    public function behaviors()
    {
        return [
            'access' => [
                'class' => AccessControl::className(),
                'only' => ['special-callback'],
                'rules' => [
                    [
                        'actions' => ['special-callback'],
                        'allow' => true,
                        'matchCallback' => function ($rule, $action) {
                            return date('d-m') === '31-10';
                        }
                    ],
                ],
            ],
        ];
    }

    // Match callback called! This page can be accessed only each October 31st
    public function actionSpecialCallback()
    {
        return $this->render('happy-halloween');
    }
}
```


Role based access control (RBAC)
--------------------------------

Role-Based Access Control (RBAC) provides a simple yet powerful centralized access control. Please refer to
the [Wiki article](http://en.wikipedia.org/wiki/Role-based_access_control) for details about comparing RBAC
with other more traditional access control schemes.

Yii implements a General Hierarchical RBAC, following the [NIST RBAC model](http://csrc.nist.gov/rbac/sandhu-ferraiolo-kuhn-00.pdf).
It provides the RBAC functionality through the [[yii\rbac\ManagerInterface|authManager]] [application component](structure-application-components.md).

Using RBAC involves two parts of work. The first part is to build up the RBAC authorization data, and the second
part is to use the authorization data to perform access check in places where it is needed.

To facilitate our description next, we will first introduce some basic RBAC concepts.


### Basic Concepts

A role represents a collection of *permissions* (e.g. creating posts, updating posts). A role may be assigned
to one or multiple users. To check if a user has a specified permission, we may check if the user is assigned
with a role that contains that permission.

Associated with each role or permission, there may be a *rule*. A rule represents a piece of code that will be
executed during access check to determine if the corresponding role or permission applies to the current user.
For example, the "update post" permission may have a rule that checks if the current user is the post creator.
During access checking, if the user is NOT the post creator, he/she will be considered not having the "update post" permission.

Both roles and permissions can be organized in a hierarchy. In particular, a role may consist of other roles or permissions;
and a permission may consist of other permissions. Yii implements a *partial order* hierarchy which includes the
more special *tree* hierarchy. While a role can contain a permission, it is not true vice versa.


### Configuring RBAC Manager

Before we set off to define authorization data and perform access checking, we need to configure the
[[yii\base\Application::authManager|authManager]] application component. Yii provides two types of authorization managers:
[[yii\rbac\PhpManager]] and [[yii\rbac\DbManager]]. The former uses a PHP script file to store authorization
data, while the latter stores authorization data in database. You may consider using the former if your application
does not require very dynamic role and permission management.

The following code shows how to configure `authManager` in the application configuration:

```php
return [
    // ...
    'components' => [
        'authManager' => [
            'class' => 'yii\rbac\PhpManager',
        ],
        // ...
    ],
];
```

The `authManager` can now be accessed via `\Yii::$app->authManager`.

> Tip: By default, [[yii\rbac\PhpManager]] stores RBAC data in three files: `@app/rbac/items.php`, `@app/rbac/assignments.php` and `@app/rbac/rules.php`.
  Make sure these files are writable by the Web server process if the authorization needs to be changed online.
  Sometimes you will need to create these files manually.


### Building Authorization Data

Building authorization data is all about the following tasks:

- defining roles and permissions;
- establishing relations among roles and permissions;
- defining rules;
- associating rules with roles and permissions;
- assigning roles to users.

Depending on authorization flexibility requirements the tasks above could be done in different ways.

If your permissions hierarchy doesn't change at all and you have a fixed number of users you can create a
[console command](tutorial-console.md#create-command) command that will initialize authorization data once via APIs offered by `authManager`:

```php
<?php
namespace app\commands;

use Yii;
use yii\console\Controller;

class RbacController extends Controller
{
    public function actionInit()
    {
        $auth = Yii::$app->authManager;

        // add "createPost" permission
        $createPost = $auth->createPermission('createPost');
        $createPost->description = 'Create a post';
        $auth->add($createPost);

        // add "updatePost" permission
        $updatePost = $auth->createPermission('updatePost');
        $updatePost->description = 'Update post';
        $auth->add($updatePost);

        // add "author" role and give this role the "createPost" permission
        $author = $auth->createRole('author');
        $auth->add($author);
        $auth->addChild($author, $createPost);

        // add "admin" role and give this role the "updatePost" permission
        // as well as the permissions of the "author" role
        $admin = $auth->createRole('admin');
        $auth->add($admin);
        $auth->addChild($admin, $updatePost);
        $auth->addChild($admin, $author);

        // Assign roles to users. 1 and 2 are IDs returned by IdentityInterface::getId()
        // usually implemented in your User model.
        $auth->assign($author, 2);
        $auth->assign($admin, 1);
    }
}
```

After executing the command with `yii rbac/init` we'll get the following hierarchy:

![Simple RBAC hierarchy](images/rbac-hierarchy-1.png "Simple RBAC hierarchy")

Author can create post, admin can update post and do everything author can.

If your application allows user signup you need to assign roles to these new users once. For example, in order for all
signed up users to become authors you in advanced application template you need to modify `frontend\models\SignupForm::signup()`
as follows:

```php
public function signup()
{
    if ($this->validate()) {
        $user = new User();
        $user->username = $this->username;
        $user->email = $this->email;
        $user->setPassword($this->password);
        $user->generateAuthKey();
        $user->save(false);

        // the following three lines were added:
        $auth = Yii::$app->authManager;
        $authorRole = $auth->getRole('author');
        $auth->assign($authorRole, $user->getId());

        return $user;
    }

    return null;
}
```

For applications that require complex access control with dynamically updated authorization data, special user interfaces
(i.e. admin panel) may need to be developed using APIs offered by `authManager`.


### Using Rules

As aforementioned, rules add additional constraint to roles and permissions. A rule is a class extending
from [[yii\rbac\Rule]]. It must implement the [[yii\rbac\Rule::execute()|execute()]] method. In the hierarchy we've
created previously author cannot edit his own post. Let's fix it. First we need a rule to verify that the user is the post author:

```php
namespace app\rbac;

use yii\rbac\Rule;

/**
 * Checks if authorID matches user passed via params
 */
class AuthorRule extends Rule
{
    public $name = 'isAuthor';

    /**
     * @param string|integer $user the user ID.
     * @param Item $item the role or permission that this rule is associated with
     * @param array $params parameters passed to ManagerInterface::checkAccess().
     * @return boolean a value indicating whether the rule permits the role or permission it is associated with.
     */
    public function execute($user, $item, $params)
    {
        return isset($params['post']) ? $params['post']->createdBy == $user : false;
    }
}
```

The rule above checks if the `post` is created by `$user`. We'll create a special permission `updateOwnPost` in the
command we've used previously:

```php
$auth = Yii::$app->authManager;

// add the rule
$rule = new \app\rbac\AuthorRule;
$auth->add($rule);

// add the "updateOwnPost" permission and associate the rule with it.
$updateOwnPost = $auth->createPermission('updateOwnPost');
$updateOwnPost->description = 'Update own post';
$updateOwnPost->ruleName = $rule->name;
$auth->add($updateOwnPost);

// "updateOwnPost" will be used from "updatePost"
$auth->addChild($updateOwnPost, $updatePost);

// allow "author" to update their own posts
$auth->addChild($author, $updateOwnPost);
```

Now we've got the following hierarchy:

![RBAC hierarchy with a rule](images/rbac-hierarchy-2.png "RBAC hierarchy with a rule")

### Access Check

With the authorization data ready, access check is as simple as a call to the [[yii\rbac\ManagerInterface::checkAccess()]]
method. Because most access check is about the current user, for convenience Yii provides a shortcut method
[[yii\web\User::can()]], which can be used like the following:

```php
if (\Yii::$app->user->can('createPost')) {
    // create post
}
```

If the current user is Jane with ID=1 we're starting at `createPost` and trying to get to `Jane`:

![Access check](images/rbac-access-check-1.png "Access check")

In order to check if user can update post we need to pass an extra parameter that is required by the `AuthorRule` described before:

```php
if (\Yii::$app->user->can('updatePost', ['post' => $post])) {
    // update post
}
```

Here's what happens if current user is John:


![Access check](images/rbac-access-check-2.png "Access check")

We're starting with the `updatePost` and going through `updateOwnPost`. In order to pass it `AuthorRule` should return
`true` from its `execute` method. The method receives its `$params` from `can` method call so the value is
`['post' => $post]`. If everything is OK we're getting to `author` that is assigned to John.

In case of Jane it is a bit simpler since she's an admin:

![Access check](images/rbac-access-check-3.png "Access check")

### Using Default Roles

A default role is a role that is *implicitly* assigned to *all* users. The call to [[yii\rbac\ManagerInterface::assign()]]
is not needed, and the authorization data does not contain its assignment information.

A default role is usually associated with a rule which determines if the role applies to the user being checked.

Default roles are often used in applications which already have some sort of role assignment. For example, an application
may have a "group" column in its user table to represent which privilege group each user belongs to.
If each privilege group can be mapped to a RBAC role, you can use the default role feature to automatically
assign each user to a RBAC role. Let's use an example to show how this can be done.

Assume in the user table, you have a `group` column which uses 1 to represent the administrator group and 2 the author group.
You plan to have two RBAC roles `admin` and `author` to represent the permissions for these two groups, respectively.
You can create set up the RBAC data as follows,


```php
namespace app\rbac;

use Yii;
use yii\rbac\Rule;

/**
 * Checks if user group matches
 */
class UserGroupRule extends Rule
{
    public $name = 'userGroup';

    public function execute($user, $item, $params)
    {
        if (!Yii::$app->user->isGuest) {
            $group = Yii::$app->user->identity->group;
            if ($item->name === 'admin') {
                return $group == 1;
            } elseif ($item->name === 'author') {
                return $group == 1 || $group == 2;
            }
        }
        return false;
    }
}

$auth = Yii::$app->authManager;

$rule = new \app\rbac\UserGroupRule;
$auth->add($rule);

$author = $auth->createRole('author');
$author->ruleName = $rule->name;
$auth->add($author);
// ... add permissions as children of $author ...

$admin = $auth->createRole('admin');
$admin->ruleName = $rule->name;
$auth->add($admin);
$auth->addChild($admin, $author);
// ... add permissions as children of $admin ...
```

Note that in the above, because "author" is added as a child of "admin", when you implement the `execute()` method
of the rule class, you need to respect this hierarchy as well. That is why when the role name is "author",
the `execute()` method will return true if the user group is either 1 or 2 (meaning the user is in either "admin"
group or "author" group).

Next, configure `authManager` by listing the two roles in [[yii\rbac\BaseManager::$defaultRoles]]:

```php
return [
    // ...
    'components' => [
        'authManager' => [
            'class' => 'yii\rbac\PhpManager',
            'defaultRoles' => ['admin', 'author'],
        ],
        // ...
    ],
];
```

Now if you perform an access check, both of the `admin` and `author` roles will be checked by evaluating
the rules associated with them. If the rule returns true, it means the role applies to the current user.
Based on the above rule implementation, this means if the `group` value of a user is 1, the `admin` role
would apply to the user; and if the `group` value is 2, the `author` role would apply.
